JAR_2432
JAR_2410JAR_2409JAR_2406

GoFly Project V6 Basic GLOHD

$369.00

Infrared touch screen, 6inch, 1448×1072 high resolution eink based instrument with backlight supporting LK8000/ XCsoar apps with IMU hardware sensor fusion, SDcard IGC logging, flight grade GPS/Glonass solution.

Clear
SKU: gfpv6glohd

Product Description

Infrared touch, 6inch, 1448×1072 high resolution carta eink based instrument with backlight supporting LK8000/ XCsoar apps with IMU hardware sensor fusion, SDcard IGC logging, flight grade GPS/Glonass solution.

  • dual IGC logging: software level (from flying app) and hardware level, directly into SDcard
  • safe power off solution, vario module will safely shut down 30 seconds after shutting down flying app
  • 100Hz barometric pressure sampling rate at 10cm resolution
  • IMU(acc/gyro/magnetometer) fusion for instantaneous vario audio
  • vario/gps settings customization based on configuration files located on SDcard
  • hardware sensor fusion hub solution (dedicated ultralow power solution for hardware IMU sensor fusion) with self calibration algorithms
  • GPS/Glonass professional grade uBLOX gps module with additional SAW filter and amplifier configured for aircraft mode for high precision 3D position
  • energy efficient piezo speaker driver with independent audio volume setting for lift, sink and alarms
  • large 25x25mm GPS antenna with wide ground planar for good noise immunity and gps signal gain
  • additional 3500mAh battery for more than 10-15 hours real flight conditions
  • UV resistant enclosure made from marine grade plastic
  • Dimensions ~156 x 115 x 19mm
  • Total weight 380 grams
  • easy firmware upgrade by micro USB interface (delete/drag/drop)
  • full ereader coexistence (switching between flying app or ereader mode)
  • vario/GPS deep sleep mode for battery savings when reading ebooks

Additional Information

Weight 0.5 kg
Dimensions 155 x 111 x 19 mm
App Installed:

LK8000, XCSoar